aluminium foil packaging
"
圧力容器のための媒体厚いの3003アルミ合金 ホイル
1. Product Details : Aluminium coil/Aluminium Strip Aluminium Alloy Thickness (mm) Width (mm) Temper A1050,A1060,A1070,A1100 0.2-500 20-2500 O,H12,H14,H16,H18,H22,H24,H26 2.Product Standard: As per international standard ASTM OR EN standard , all chemical composition ,mechanical property ,size tolerance ,flat tolerance ,etc strictly as per ASTM OR EN standard Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.4 0.05 0.05 0.05 _ 0.05 0.03 0.03 _ ≥99.5 1060 0.25 0
トレーラーの使用薄いアルミニウム シート、アルミニウム シート3mmの製造所の終わりの表面処理
Trailer Use Thin Aluminum Sheet , Aluminium Sheet 3mm Mill Finish Surface Treatment 3003,3004,5052 Aluminum alloy wide sheet products suitable for proof and side wall of Van Trailer. Max Width:2650mm Length≥10000mm Three Advantages of Trailer Aluminum Sheet: 1,Large size:Max.width reaches 2650mm and the length ≥ 10000mm 2,High Uniformity:annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small 3,Precise dimension
製造所の終わりの銀色2mmのアルミニウム シート3000のシリーズおよび5000のシリーズ等級
Mill Finish Silver Color 2mm Aluminium Sheet 3000 Series And 5000 Series Grade Specification: 1.Roof Plate Alloy Temper Thickness(mm) Width(mm) Length(mm) 3003 H14/H16/H24/H26 0.2-3.5 2000-2650 ≥10000 5052 H32/34 0.2-3.5 2000-2650 ≥10000 2.Side Walls Alloy Temper Thickness(mm) Width(mm) Length(mm) 3004 H36/H38 0.2-3.5 2000-2650 ≥10000 5052 H32/34 0.2-3.5 2000-2650 ≥10000 Mechanical Properties: Alloy Temper Yield Strength(Rp0.2/MPa) Tensile StrengthRm(MPa) Elongation A(%)
つや出しの平らなアルミニウム ストリップの変圧器/自動ラジエーターのためのアルミニウム トリムのコイル
8011 H14 0.3mm*140mm Aluminium/Aluminum Strips of Narrow width for Production Of Transformer, Auto radiator Commercial terms Minimum Order Quantity: 5 metric tons Price: negotiation Payment Terms: T/T or LC Supply Ability: 50,000 mt per year Delivery Time: 30 working days after received your down payment Packaging Details: Standard export packaging Terms and conditions: 1, Trade term: CIF / CFR / FOB 2, Payment term: 30% before production+70% before shipment 100% Irrevocable
最高の幅:後部懸濁液のための2650mm、3003/3004/5052 Ultrawideそして薄い銀製のHot Rollingアルミニウム シート
Alloy states: 5052,3003,3004 Applications: suitable for proof and side wall of Rear suspension Three Advantages of Rear suspension Aluminum Sheet: 1,Large size:Max.width reaches 2650mm and the length ≥ 10000mm 2,High Uniformity:annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small 3,Precise dimension and excellent flatness: dimension and flatness meet EN/ASTM standard. Mechanical Properties: Alloy Temper Yield
合金3003アルミニウム熱伝達の版のラジエーター/コンデンサーのアルミニウム コイル
Alloy 3003 Aluminum Heat Transfer Plates In Coil For Radiator/Condenser/Evaporator/Intercooler/Oil Cooler/Heater Specification: Width(mm) Thickness(mm) Length(mm) Inside Diameters(mm) Sheet 500-1070 0.5-5.0 500-2500 - Strip 12-1070 0.2-3.0 - 150,200,300,400,500 Foil 12-1070 0.05-0.2 - 150,200,300,400,500 Composite ratio 4-18%(per side) Percent Clad(per side) 4-8% ＞ 8-18% Cladding tolerance ±1.5% ±2.0% Main mechanical of aluminum alloy and composite-material for welding heat
5% 8% 10% 12% Cladded頑丈のためのアルミニウム シートのコイル/アルミニウム シート ロール
1060, 3003, 5052/4343, 4045, 7072 5%,/8%/10%/12% Aluminum cladded material for heavy duty 1. Chemical composition of cladded material, core material for welding heat exchangers (1) Cladded MaterialsAlloySiFeCuMnMgZnZrTicode43436.8-8.20.80.250.1－0.2－0.0514343+1%Zn6.8-8.20.80.250.1－0.5-1.5－0.05240459.0-11.00.80.30.05－0.2－0.234045+1%Zn9.0-11.00.80.30.05－0.5-1.5－0.2440049.0-10.50.80.250.11.0-2.00.2－0.2570720.70.10.10.10.8-1.3－－650050.30.70.20.20.5-1.10.5-1.0－0.037 (2) Core
ブランクのアルミニウム熱伝達はアルミニウム シート建物のためのめっきしたり/昇華
High Quality Blank Heat Transfer Sublimation Aluminum Sheet/ Plate For Building aluminum heat transfer plate Aluminium sheet application: building, celling, roofing, refrigerator.... DC (hot rolling) and CC (continue cast) production lines, good perpority, no wave, no scratch General alloy temper and specification see below table; product Alloy Temper Remark thickness width I.D. mm Aluminum sheet 1070 1060 1050 1145 1235 1035 1100 1200 3A21 3003 3004 3105 3103 8011 5052 6061
1.5mmの鋼鉄覆われた薄いアルミニウム ストリップ、標準的な輸出包装を金属片
1.5mm Steel Clad Thin Aluminum Strips , Metal Strips Standard Export Packaging Commercial terms Minimum Order Quantity: 5 metric tons Price: negotiation Payment Terms: T/T or LC Supply Ability: 50,000 mt per year Delivery Time: 30 working days after received your down payment Packaging Details: Standard export packaging Description of our production Material of Steel(DC01 standard): Content(%) C Si Mn P S Alta Steel ≤0.12 ≤0.03 ≤0.6 ≤0.045 ≤0.045 ≥0.02 Material of Aluminum
