アルミニウム合金シート中国のメーカーページ 5

軍の避難所、5052/3003/3004のための銀製のHot Rollingアルミニウムシート

Three Advantages of Military Shelter Aluminum Sheet: 1,Large size:Max.width reaches 2650mm and the length ≥ 10000mm 2,High Uniformity:annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small 3,Precise dimension and excellent flatness: dimension and flatness meet EN/ASTM standard. Applications: suitable for proof and side wall of Military Shelter. Alloy states: 5052,3003,3004 Specification: 1.Roof Plate Alloy

トレーラーの使用薄いアルミニウムシート、アルミニウムシート3mmの製造所の終わりの表面処理

Trailer Use Thin Aluminum Sheet , Aluminium Sheet 3mm Mill Finish Surface Treatment 3003,3004,5052 Aluminum alloy wide sheet products suitable for proof and side wall of Van Trailer. Max Width:2650mm Length≥10000mm Three Advantages of Trailer Aluminum Sheet: 1,Large size:Max.width reaches 2650mm and the length ≥ 10000mm 2,High Uniformity:annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small 3,Precise dimension

幅1500max 1000のシリーズ明白なアルミニウムシート構造のために使用される

production standard : as per international standard ASTM OR EN standard , all chemical composition ,mechanical property ,size tolerance ,flat tolerance ,etc strictly as per ASTM OR EN standard Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.4 0.05 0.05 0.05 _ 0.05 0.03 0.03 _ ≥99.5 1060 0.25 0.35 0.05 0.03 0.03 _ 0.05 0.03 0.03 _ ≥99.6 1100 Si+Fe:0.95 0.05~0.40 0.05 _ _ 0.1 _ 0.05 0.15 ≥99 1200 Si+Fe:1.00 0.05 0.05 _ 0.1 0.05 0.05 0.15 ≥99 3003 0.6 0.7 0.05~0

1050 / 通行人の往来の印のための3003の円の形の反射アルミニウムディスク

1050 / 3003 Circle Shape Reflective Aluminum Pedestrian Traffic Sign Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright silver, mill finished Chemical Composition (WT. %) ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other 1050 99.5 0.25 0.4 0.05 0.05 0

H24経済的なアルミニウム円は交通標識/交通標識の合金1060 1050を

1060 / 1050 H24 Economical Aluminium Circles Traffic Signs or Road Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Alloy: 1050, 1060, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.5-8.0mm Diameter: 100-1000mm Surface Treatment: Mill Finish MOQ: 5MT per Size Leadtime: 15-30 Days Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Product Range: 1) Product Specifications:

堅いアルミニウム円つや出しの半分の1060/1050 H24のアルミニウムディスク低強度を

Hot Rolled 1060 / 1050 H24 Half Hard Aluminum Circle Traffic Sign Use Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Alloy: 1050, 1060, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.5-8.0mm Diameter: 100-1000mm Surface Treatment: Mill Finish MOQ: 5MT per Size Leadtime: 15-30 Days Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Product Range: 1) Product Specifications:

反射アルミニウムサークル・シートOは1050/1100/3003の交通安全の印を和らげる

Reflective Circle Aluminum Traffic Sign for Road Safety Sign 1050 / 1100 / 3003 Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle Alloy: 1050, 1060, 1070, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.50~8.0mm Diameter: 100~1000mm Product Range: 1) Product Specifications: Product Name Alloy Purity Hardness Specifications(mm) Thickness Diameter Aluminum Circle 1050 1060 3003 96.95-99.70% O,H12,H14

ハイウェーの道のための銀製の滑らかな1050 H34アルミニウム円/アルミニウムディスク

1050 / 3003 Aluminum Road Sign / Aluminum Traffic Sign for Highway Road Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle Alloy: 1050, 1060, 1070, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.50~8.0mm Diameter: 100~1000mm Product Range: 1) Product Specifications: Product Name Alloy Purity Hardness Specifications(mm) Thickness Diameter Aluminum Circle 1050 1060 3003 96.95-99.70% O,H12,H14 0.5-6

/アルミニウム円1100を印刷するコーティングアルミニウム調理器具のための1050 1060 3003

Aluminum Circle / Disc 1100 1050 1060 3003 for Aluminum Cookwares / Road Signs Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. 3003 Aluminum Circle Specification Product 3003 aluminum circle Alloy 3003,3004,3005,3105 Temper H12,H18,H14,H16,H22,H24,H26 Thickness 0.5-8.0mm Diameter 100-1000mm Color Silver, or as per customer’s requirement Application The product is widely used in Reflector, Traffic sign. Deeply

よい平坦のアルミニウム円の交通標識0.5 - 8.0mmの厚いアルミニウムウエファー

1050 / 1100 / 3003 Good Flatness Aluminium Circle for Traffic Sign / Road Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright

報告のアルミニウム円3003 1060の耐食性の連続鋳造

Aluminum Disc for Road Sign / Traffic Sign / Bulletin 1050 / 1100 / 3003-O Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright silver,

製造所はアルミニウム円を表記/ランプのポストのための100 - 1000mmの直径終えた

Aluminum Circle Signage / Lamp Post / Road Sign / Thin Plate 1050 / 1100 / 3003-O Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright

円形の部分の調理器具/交通標識1050のためのアルミニウムサークル・シート1100 3003 O

Aluminum Circle Sheet / Round Piece For Cookware / Traffic Sign 1050 / 1100 / 3003-O Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium circle: 1) Alloy: 1050/1060/1070/1100/3003 2) Temper: O, H12, H14, H16, H18, H22, H24, H26, H32 3) Thickness: 0.50-8.00mm 4) Diameter: 100-1000mm 5) Dimensions can be produced according to clients' specifications 6) Good plasticity, conductivity 7) Generally used in

3003 / 明るい表面の深いデッサンが付いている1050/1060のアルミニウムディスク円

3003 / 1050 / 1060 Aluminum Circle Sheet / Round Piece For Cookware / Traffic Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium circle 1. bright surface, no scratch 2. Deep drawing 3. Customized packing ways are welcomed 4. High quality Aluminium circle: 1) Alloy: 1050/1060/1070/1100/3003 2) Temper: O, H12, H14, H16, H18, H22, H24, H26, H32 3) Thickness: 0.50-8.00mm 4) Diameter: 100-1000mm 5)

炊事用具アルミニウムシートの円/アルミニウムウエファー/アルミニウムディスク3003

3003 / 1050 / 1060 Aluminum Circle Sheet / Round Piece For Cooking Utensils Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Specifications: Alloy: 1050, 1060, 1100, 3003 Temper: O-H112 Thickness: 0.5-8.0mm Diameter: 100-1000mm Surface Treatment: Mill Finish MOQ: 5MT per Size Leadtime: 15-30 Days Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY

交通標識/台所のための回転の非棒の調理器具のアルミニウム円

3003 / 3105 / 3005 Aluminum Disc Circle / Round Piece For Cookware / Traffic Sign / Kitchens Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. 3003 Aluminum Circle Specification Product 3003 aluminum circle Alloy 3003,3004,3005,3105 Temper H12,H18,H14,H16,H22,H24,H26 Thickness 0.5-8.0mm Diameter 100-1000mm Color Silver, or as per customer’s requirement Application The product is widely used in Reflector, Traffic sign

防水銀製アルミニウム円/アルミニウム円形の厚さ0.5 - 8.0mm

3003 Aluminum Disc Circle / Round Piece For Cookware / Traffic Sign / Kitchens Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. 3003 Aluminum Circle Specification Product 3003 aluminum circle Alloy 3003,3004,3005,3105 Temper H12,H18,H14,H16,H22,H24,H26 Thickness 0.5-8.0mm Diameter 100-1000mm Color Silver, or as per customer’s requirement Application The product is widely used in Reflector, Traffic sign. Deeply

滑らかな表面とつや出し/冷間圧延される交通標識のアルミニウムディスク

1050 / 3003 Aluminum Disc Circle / Round Piece For Cookware / Traffic Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright silver, mill finished

製造所の終わりはアルミニウム円、高い湿気のアルミニウム円形シートを磨いた

1050 Aluminum Circle / Round Piece / Aluminum Discs For Cookware / Traffic Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Product Description: Alloy:1050, 1060, 1100, 3003 Temper:O-H112 Thickness:0.5-8.0mm Diameter:100-1000mm Tolerance of Thickness:±0.05mm Tolerance of Diammeter:-0.05~+0.10mm Surface Treatment:Mill Finish MOQ:5MT per Size Leadtime:15-30 Days Payment Terms:30% by TT in advance as deposit and

合金1100の熱間圧延のアルミニウム円/アルミニウムディスクは親水性を陽極酸化した

1050 / 1100 / 3003 Hot Rolling Aluminum Circle / Round Piece / Aluminum Discs Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Product Description: Alloy: 1050, 1060, 1100, 3003 Temper O-H112 Thickness 0.5-8.0mm Diameter 100-1000mm Tolerance of Thickness ±0.05mm Tolerance of Diammeter -0.05~+0.10mm Surface Treatment Mill Finish MOQ 5MT per Size Leadtime 15-30 Days Payment Terms 30% by TT in advance as deposit and 70

非棒鍋O - H112気性のためのつや出しアルミニウム円の円形の部分

1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Non Stick Pan Product Description: Alloy: 1050, 1060, 1100, 3003 Temper O-H112 Thickness 0.5-8.0mm Diameter 100-1000mm Tolerance of Thickness ±0.05mm Tolerance of Diammeter -0.05~+0.10mm Surface Treatment Mill Finish MOQ 5MT per Size Leadtime 15-30 Days Payment Terms 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other 1050

産業純粋なアルミニウムが付いているISO9001酸化表面アルミニウム円

1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Utensils Product Description: Alloy: 1050, 1060, 1100, 3003 Temper O-H112 Thickness 0.5-8.0mm Diameter 100-1000mm Tolerance of Thickness ±0.05mm Tolerance of Diammeter -0.05~+0.10mm Surface Treatment Mill Finish MOQ 5MT per Size Leadtime 15-30 Days Payment Terms 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other

合金3003 H26はアルミニウムコイル色を塗ったACP 60のための赤いPVDFに- 100MPa和らげる

Alloy 3003 H26 Temper Aluminium Coil Coated With Coluor Red , PVDF For ACP Our chemical composition: Alloy Si Fe Cu Mn Mg Zn Cr Ti code 8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.1 0.05 0.08 1 3003 0.6 0.7 0.05-0.2 1.0-1.5 － 0.1 －－ 2 5052 0.25 0.4 0.1 0.1 2.2-2.8 0.1 0.15-0.35 － 3 1060 0.25 0.35 0.05 0.03 0.03 0.05 －－ 4 1145 Si+Fe:0.55 0.05 0.05 0.05 －－ 0.03 5 3A21 0.6 0.7 0.2 1.0-1.6 0.05 0.1 － 0.15 6 Our mechanical property: Alloy Code temper Tensile Strength Rm(MPa) Yield

1050 / 企業を調理するための1100/3003のHot Rollingアルミニウム円の円形の部分

1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Industry Product Description: 1. Alloy: 1050, 1060, 1100, 3003 2. Temper: O-H112 3. Thickness: 0.5-8.0mm 4. Diameter: 100-1000mm 5. Tolerance of Thickness:±0.05mm 6. Tolerance of Diammeter:-0.05~+0.10mm 7. Surface Treatment: Mill Finish 8. MOQ: 5MT per Size 9. Leadtime: 15-30 Days 10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY

Prev 2 3 4 5 6 次へ